AVAILABLE FOR ORDERS, SHIPPING.
Worldwide delivery -
- This shop - in-stock, INSTANT ORDER!
- Aliexpress-1 - in-stock, INSTANT ORDER!
- Aliexpress-2 (SMLIGHT) - in-stock, INSTANT ORDER!
We do not sell to Russia, Belarus and Turkey.
--------------------------------
- The official product page is here - https://smlight.tech/product/slzb-mr3/
- Review Youtube EN - https://www.youtube.com/watch?v=2OzLyjlITjQ
- Review Youtube DE - https://www.youtube.com/watch?v=l0TuvQKxuLA
- Review Youtube ES - https://www.youtube.com/watch?v=QC6wYT6FNTE
SLZB-MR2 product
information page
Intro
The SLZB-MR2 is SMLIGHT’s new coordinator,
combining CC2652P (used in SLZB-06) and EFR32MG21 (used in SLZB-06M) chips in a single device to deliver full
support for both Zigbee and Thread networks. Designed to work seamlessly with
Zigbee2MQTT and ZHA, the SLZB-MR2 offers unmatched flexibility for your smart home
setup. Whether you're building a pure Zigbee network, experimenting with Matter
over Thread, or want the freedom to switch between ecosystems, this multiradio
coordinator brings it all together - in one powerful solution.
Where design came
from
Zigbee and Thread - alongside other popular smart home and
IoT protocols such as Z-Wave, Wi-Fi, and Bluetooth - are widely used in modern
ecosystems. Many users build their smart environments using a combination of
these protocols. However, managing such a diverse setup often requires multiple
dedicated devices: for example, a Zigbee coordinator for Zigbee networks and a
Thread Border Router for Thread.
While some commercial solutions support both Zigbee and
Thread simultaneously, they are typically locked into specific vendors or
ecosystems (a lot of such hubs with Zigbee+Trhead available on the market).
This vendor lock-in, despite showcasing the technical feasibility of coexisting
Zigbee and Thread radios in the same hardware device, limits flexibility and
user choice.
With the SLZB-MRx series, we set out to change that. Our
goal was to empower smart home enthusiasts and developers with a multiradio
device that enables native, vendor-agnostic access to both Zigbee and Thread
protocols. “MR” stands for MultiRadio - this series allows users to freely
choose their preferred ecosystem and integration path, leveraging the full
capabilities of open-source smart home software and platforms.
Technical Specifications – SLZB-MR2
Radio Chips:
- Texas Instruments CC2652P
o
Zigbee 3.0 support (Zigbee2MQTT & ZHA
compatible).
o
Thread (Matter-over-Thread) support (Open Thread
Border Router) .
o
Ideal for Zigbee networks, works perfectly also
with Thread networks.
o
+20 dBm TX power with built-in PA.
- Silicon Labs EFR32MG21
o
Zigbee 3.0 support (Zigbee2MQTT & ZHA
compatible).
o
Thread (Matter-over-Thread) support (Open Thread
Border Router).
o
Ideal for Thread networks, works perfectly also
with Zigbee networks.
o +20 dBm TX power with built-in PA.
Supported Protocols:
·
Zigbee 3.0 (Zigbee2MQTT, ZHA), at the same time
with Thread.
·
Thread (Matter-over-Thread), at the same time
with Zigbee.
·
Supports simultaneous or switchable operation
for multiradio environments.
·
Wi-Fi.
·
Bluetooth.
·
Ethernet.
Connectivity:
·
USB-C for data and power
·
Ethernet connection
Firmware:
·
Radio firmware support
o
Compatible with TI Z-Stack (for CC2652P)
o
Compatible with SL Ember/EZSP stack (for EFR32MG21).
- Radio firmware updating via web interface
- SLZB-OS
- Compatible with SLZB-OS versions 2.8.7 and up (no support on SLZB-OS versions below 2.8.7).
- SLZB-OS supported functionality:
- VPN, 20+ languages, Scripts
support, Network settings, Security, Dashboard, zHub mode, mode switcher,
OTA firmware updates etc.
Antenna:
·
Dual external antenna SMA female connectors (one
for each radio SoC)
·
PCB antenna for Wi-Fi and Bluetooth.
·
2x pre-packed high-gain 2.4 GHz antennas
included
Power Supply:
·
PoE powered, POE 48V supported
·
Powered via USB-C (5V DC)
·
Low power consumption up to 1.5W (if both radio
SoCs are running)
Enclosure:
·
Compact, durable ABS case with ventilation
·
DIN rail and wall-mount compatible (3D
models)
·
Easy sticking with two-sided adhesive tapes
·
Easy mounting with screws with screw set
(screws, screw driver, ruler) included.
LED Indicators and peripherals:
- Independent
status LEDs for each radio (6 service LEDs in total: 2 LEDs for Core SoC,
2 LEDs for CC2674P10 SoC, 2 LEDs for EFR32MG24 SoC,)
- Multibutton: supports many functions (mode switch, reset etc).
There are no reviews for this product.
No questions about this product.
